Product Name: high-power glaze resistor
Product Description: Name: High Power glaze resistor

 

A. Feature

Power wirewound resistors standard resistance tolerances ± 5% (J) ± 10% (K class);
Based on customer needs to provide more high-precision products, such as: ± 1% (Class F) ± 2% (G grade)
Temperature Coefficient: ≤ ± 350ppm / ° C
Ambient temperature -55 ° C to +155 ° C
Surface temperature of 300 ° C, the maximum temperature of 800 ° C
Resistance surface is coated with insulating resin paint, the materials are non-toxic, environmentally friendly products
Vertical ripple around the system, can reduce the parasitic inductance, and enhanced thermal dissipation, reduced size, and extend the service life
The resistance is fixed and can be set to two or more terminals with good electrical conductivity
Can also be based on customer needs, design and production in line with customer requirements
 
II. Size Chart


 
  
Type size (mm)
 Resistance range
 
Power
 L
 D
 d
 h
 b
 t
 I
 d1
 Fixed
 
KNG-8W 35 ± 1.5
 14 ± 2
 5.5 ± 0.5
 28.5 ± 2.5
 3.5 ± 0.8
 4.5 ± 0.1
 20 ± 2
 2 ± 0.1
 5.1Ω ~ 3.3KΩ
 
KNG-16W 45 ± 1.5
 17 ± 2
 8 ± 0.5
 31 ± 2.5
 3.5 ± 0.8
 4.5 ± 0.1
 20 ± 2
 2 ± 0.1
 5.1Ω ~ 10KΩ
 
KNG-25W 51 ± 2
 21 ± 2.5
 12 ± 0.6
 35 ± 2.5
 3.5 ± 0.8
 4.5 ± 0.1
 30 ± 2
 2 ± 0.1
 10Ω ~ 24KΩ
 
KNG-40W 87 ± 2.2
 21 ± 2.5
 12 ± 0.6
 35 ± 2.5
 3.5 ± 0.8
 4.5 ± 0.1
 35 ± 2
 2 ± 0.1
 20Ω ~ 51KΩ
 
KNG-50W 91 ± 2.4
 29 ± 3
 20 ± 1.1
 43 ± 3
 4.5 ± 1
 6 ± 0.5
 40 ± 2
 2.5 ± 0.1
 20Ω ~ 51KΩ
 
KNG-75W 140 ± 3.2
 29 ± 3
 20 ± 1.1
 43 ± 3
 4.5 ± 1
 6 ± 0.5
 40 ± 2
 2.5 ± 0.1
 24Ω ~ 56KΩ
 
KNG-100W 170 ± 3.5
 29 ± 3
 20 ± 1.1
 43 ± 3
 4.5 ± 1
 6 ± 0.5
 120 ± 2
 2.5 ± 0.1
 24Ω ~ 62KΩ
 
KNG-150W 215 ± 4
 29 ± 3
 20 ± 1.1
 43 ± 3
 4.5 ± 1
 6 ± 0.5
 165 ± 2
 2.5 ± 0.1
 20Ω ~ 150KΩ
 
KNG-300W 254 ± 4
 40 ± 3
 30 ± 1.1
 50 ± 3
 5 ± 1
 6 ± 0.5
 205 ± 2
 3 ± 0.1
 20Ω ~ 150KΩ
 
KNG-600W 330 ± 4
 50 ± 3
 40 ± 1.5
 63 ± 3
 8 ± 1
 6 ± 0.5
 280 ± 2
 3 ± 0.1
 20Ω ~ 150KΩ
 
KNG-1000W 430 ± 4
 80 ± 3
 70 ± 2
 130 ± 3
 18 ± 1
 18 ± 0.5
 380 ± 5
 5 ± 0.1
 10Ω ~ 150KΩ
 
KNG-1200W 430 ± 4
 80 ± 3
 70 ± 2
 130 ± 3
 18 ± 1
 18 ± 0.5
 380 ± 5
 5 ± 0.1
 10Ω ~ 150KΩ
 
KNG-2400W 430 ± 4
 100 ± 3
 80 ± 2
 130 ± 3
 18 ± 1
 18 ± 0.5
 380 ± 5
 5 ± 0.1
 10Ω ~ 150KΩ
 
 
 
III Electrical Characteristics

Project
 Performance requirements
 Test methods
 
Temperature coefficient
 - 350ppm / ° C ≤ + a ≤ + 350ppm / ° C
 JIS5202-5.2
-55 ° C to +155 ° C
T.C.R = (R2-R1) × 10 ^ 6/R1 × (T2-T1) (PPM / ℃)
R1: at room temperature (T1) impedance value;
R2: room temperature to +100 ° C (T2) impedance
 
Short time overload
 ΔR ≤ ± (2% of R0 +0.1 Ω)
 JIS5202-5.5
Five times the rated voltage for 5 seconds
 
Resistance to soldering heat
 ΔR ≤ ± (1% of R0 +0.1 Ω)
 JIS5202-6.4
Solder pot temperature: 350 ± 10 ° C dip furnace time: 3 ± 0.5 seconds
Solder pot temperature: 260 ± 5 ° C dip furnace time: 3 ± 1 seconds
 
Incombustible not obvious flame SJ3272-90
Moisture-Proof Load Life
 ΔR ≤ ± (5% of R0 +0.1 Ω)
 JIS5202-7.9
40 ± 2 ° C, 90 ~ 95% RH
Increase in the humidity box rated DC voltage test of 1.5 hours, stop 0.5 hours to 1000 hours of continuous testing
 
Temperature life
 ΔR ≤ ± (5% of R0 +0.1 Ω)
 JIS5202-7.10
70 ± 2 ° C in the incubator of rated voltage test of 1.5 hours, stop 0.5 hours to 1000 hours of continuous testing
 
 

 
 
Note IV use:

: (1) Non-flammable resistors used for the first time power will produce smoke situation is normal and please feel at ease to use
(2) The Company is not flammable paint in the United States UL-94 incombustibility test V-0 rating, burning to continue the time to 0 seconds
3 resistant to cleaning, non-flammable resistors can not use organic solvent cleaning
4 oil which is not flammable resistors can not use oil which
High-frequency mechanical incombustible Resistor wirewound and inductance, can not be used in the high-frequency mechanical, subject to the choice of appropriate resistor, and we discuss
Instantly enhance (surge) current pulse (pulse): required Inca large load in a short period of time must be confirmed instantly enhance the resistance (surge) characteristics
Practical load: In order to prevent the fatigue resistance of the life of the alloy wire, the use of electricity remain in the fixed grid voltage reduce the curve
Minimum load rate: In order to prevent oxidation caused by exposure to adverse growth generated over time, use the freeze power more than 1/10 power
. Incombustible resistor coating insulating film hardness higher than 3H pencil hardness, but do not portray a screwdriver and other sharp objects
10 non-flammable resistors used in the full load rating, the surface of the high temperature about 350 ℃ -400 ℃, please do not touch the hand to long-term use for the maintenance of the resistor, keep the resistor surface temperature rise below 200 ℃
11 to suppress the temperature rise requires considerable tolerance margin, do not use exactly the full load rating. Prolonged use of its security concerns, the wattage must be greater than four times the rated power, and try to use less than 25% of the fixed grid power
12 and place Note: Sometimes the line-wire resistive, depending on the resistance of the use of diameter is very thin (thinner than hair) resistance line. Environment from salt, more than factors such as humidity, dust, corrosive, and they often result in fracture diameter, avoid use in such an environment. Please note not to let the dust of the surface of savings. If dust buildup will cause breakage or poor contact